|Special Voltage (different from 400 V, 50 cycles)||on demand|
|Surrounding catwalk||€ 3.878,-|
|additional operator's panel||€ 856,-|
|Platform set in the floor||on demand|
|Double clamping (pallet clamping, exchanging system pallet against system pallet)||€ 4.200,-|
|logistics inline||€ 15.500,-|
|Pallet exchange system||€ 33.500,-|
|Spare parts pack (containing one set of the basic spare and wear parts)||on demand|
|Automatic removal of the empty pallet||€ 12.000,-|
|Additional roller conveyor for version LOGISTICS||€ 5.450,-|
|Additional lifting bar for pile correction (for double clamping)||€ 1.450,-|
|Transport insurance||€ 240,-|
|Placement (at ground level), installation, setup, training||€ 6.500,-|
|Service contract (5 years)||on demand|
Payment information 20% deposit at issue of order. You will receive an advance payment invoice for 20 % of the total amount, which we kindly ask you to transfer to our account within 10 days on receipt of this invoice, at the latest.
80% remaining payment prior to delivery. You will receive a final invoice for 80 % of the total price (i. e. the amount still to be paid) as soon as the machine will be ready for shipment. As soon as your payment has been credited to our bank-account, we will issue a release for shipment. Guarantees / Warranties The guarantee period extends over 12 months from the date of delivery. All amounts in EUR, plus VAT, plus shipment and service costs. General note on the final price! Total price ex works, including packing, excluding transport insurance and installation, strictly net. This is a domestic price for the Federal Republic of Germany, prices for the sale abroad may be higher.
Thank you for your purchase
Contract price (total):
Method of Payment: Bill
Baumann pile turners BSW 6-1500 AUP have been developped especially for the demands of the automatic non-stop in the feeding attachment of the different printing-machines. Special system pallets are used.
Complete with CE-declaration, operator's manual and wiring diagrams;
electric installations for 3 x 400 V + PE, 50 cycles
The current delivery-time is about 16 weeks on receipt of your order.
- pile turning
- aligning the edges of a centered stack exactly, by means of an expandable alignemnt-ruler
- exchanging transport-pallets against system-pallets
- ventilating and thus separating the sheets prior to the printing or die-cutting process
- turning different substrates (from thinner to very strong materials)
Scope of delivery:
- the pile-turner can be installed on a level floor (no pit is required), suitable for formats 3, 6 and 7
- stop with automatic clamping system for system pallets (format 6) for an easy exchange of the transport-pallet against the system-pallet.
- expandable and retractable guide for a central positioning of the stack on the system-pallet
- intensified aeration device with ventilation boxes (adjustable to suit the selected format)
- vibration device
Both the pile and the transport pallet are put (together) on top of the system pallet (approx. centrical with a flushed front endge) by means of a forklift truck. Putting the system pallet into the pile-turner after taking out the transport pallet (which is usually a complicated and thus slow procedure) is not necessary.
After the carrying plates have been closed and the pile has been turned by 180 °, the system pallet is clamped in its position on the upper board before opening the carrying boards. After the opening, a gap opens between the transport pallet and the system pallet - great enough for a manual removal of the transport pallet. (Turning the pile directly from a system pallet onto another system pallet is not included, but is available as an option).
Before putting the pile into the pile turner, the format is registered at the operating panel. After that, the alignment guide and the allocated aeration box get into the alignment position. Together with the fixed alignment stop of the system pallet they make sure that the pile gets into the centrical position during the alignment process (the distances to the right and left edge of the pallet will be identical). This is possible as the alignment-ruler is not stationary and not guided by the carrying boards but extends only when the alignment process is started. It can thus "sit" on the projecting system pallet. The alignment ruler is expandable on one side and motor driven and positions according to the format width, which has been entered at the operator's panel.
Aeration and vibration
After the platforms have been closed and the pile has been turned and tilted into the alignment-position, it is aligned against the alignment-ruler (the alignment being assisted by the aeration and vibration devices)
General note on the final price!
Total price ex works, including packing, excluding transport insurance and installation, strictly net.
This is a domestic price for the Federal Republic of Germany, prices for the sale abroad may be higher.
|Min. sheet format||500 x 860 mm|
|Max. sheet format||1030 x 1440 mm|
|Max. loading capacity||2000 kg|
|Interior platform size||1500 x 1235 mm|
|Max. pile height||1800 mm (ohne Paletten)|
|Min. pile height||600 mm (ohne Paletten)|
|Power supply kVA||18 kVA|
* The technical data may vary depending on the version and the desired options. Please contact us to receive the technical data for your individual configuration.
- The necessary ground conditions according to DIN 18202 must be ensured for the complete installation surface of the pile-turner.
- A power supply of 400 V, 50 cycles, neutral conductor, PE is to be provided by the customer.
- The air-supply with a minimum of 6 bar is to be provided by the customer; the transfer point must be lockable.
The installation will take approximately four working days, plus set-up and travelling-times. We assume that all necessary preparations on site have been made out prior to the installation so that the installation can be carried out without interruption and delay. For fitting work, unpacking and transport of equipment, the customer provides some of his staff, transporting and lifting equipment.
- Compressed-air is required.
- The machine is dowelled to the floor.
- The machine is equipped with a safety-fence as well as with safety-light barriers.
- Floor loading: 2500 kg / m² (please check the load bearing capacity)